【資料下載】自動噴針定位優化納噴霧關鍵參數
Establishing optimal spray conditions for nanoLC-MS is a key part of method development. Nano-ESI is dependent on a number of factors, including the effective voltage, specific dimensions of a given spray tip, effective flow rate, and mobile phase composition. All of these parameters can be tightly controlled through instrumentation software and commercially available nano-ESI emitters. The position of the emitter relative to the MS orifice plays an important role in spray optimization but is a highly subjective variable lacking in the control enabled by LC and MS instrument vendors for flow rate, applied voltage, and gas parameters. The implementation of a feedback-controlled nano-electrospray source where either the spray voltage or nanospray emitter position is under feedback control has been previously reported1. The utility of a digital-control system to map the spray current of the ESI plume under a variety of experimental conditions has been demonstrated on an LCQ DECA mass spectrometer2. Here we investigate the utility of a digital-control system for spray optimization on a 4000 Q TRAP instrument.
The effects of a laminar flow of heated nitrogen gas from the inlet and a coaxial sheath gas on spray stability and analyte signal were evaluated using commercially available peptides via syringe infusion at 300 nL/min. flow rates. Proprietary software controlling an automated XYZ translation stage was modified with a custom program written to initiate an MS acquisition. Each MS acquisition was triggered by movement to a defined set of XYZ coordinates. The custom program was used to generate a raster scan pattern of the nanospray emitter XYZ coordinates relative to the MS orifice, enabling the ability to correlate analyte signal with emitter position for a specific set of nano-ESI parameters. Using this information, a parameter and position dependent map can be generated and used for reproducible and robust nano-ESI, minimizing the need for manual optimization.
關于綠綿科技
北京綠綿科技有限公司(簡稱:綠綿科技)以體現客戶服務價值為宗旨,以專業精神和技能為廣大實驗室分析工作者提供樣品前處理,、樣品制備及分析,、實驗數據精確分析和管理的全面解決方案,致力于協助客戶提高分析檢測的效率和水平,。主要代理產品聯系電話:010-82676061/2/3/4/5/6/7/8
E-mail:[email protected],。